Network enable your APC UPS to enhance manageability. APC UPS Network Management Cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP.

The configurable notification features keep you informed of problems as they occur. For protected servers, the included PowerChuteTM Network Shutdown software provides graceful, unattended shutdown in the event of an extended power outage, always keeping business information safe.

Manufacturer's Description

This APC Network Management Card is a Web-based product that manages supported devices using multiple open standards such as Hypertext Transfer Protocol (HTTP), Telnet, Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS), Secure SHell (SSH), Simple Network Management Protocol (SNMP), File Transfer Protocol (FTP), and Secure CoPy (SCP).

The AP9630 Network Management Card

Provides UPS control and self-test scheduling features

Provides data and event logs

Provides support for the APC PowerChute Network Shutdown utility

Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to provide the network (TCP/IP) values of the Management Card

Supports using the APC Remote Monitoring Service (RMS)

Enables you to configure notification through event logging (by the Management Card and Syslog), e-mail, and SNMP traps. You can configure notification for single events or groups of events, based on the severity level or category of events

Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file

Provides a selection of security protocols for authentication and encryption

Communicates with InfraStruXure Central or InfraStruXure Manager

IPv6 Support

Capable of operating on a network using IPv6 protocol

Device Encryption

Securely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3

Standard UPS RFC 1628 MIB Compatible

Make UPS information available to your preferred network, server or enterprise management system by forwarding SNMP traps (events) using RFC 1628 MIB.

Compatible with Smart-Slot enabled UPSs

Compatible with all APC SmartSlot UPSs, including Smart-UPS and Symmetra units

Localization

User interface available in major local languages; English, French, German, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese, Korean, Brazilian Portuguese & Italian.

Command line interface

Offers Telnet or SSH for remote management access

Manufacturer's Description

This APC Network Management Card is a Web-based product that manages supported devices using multiple open standards such as Hypertext Transfer Protocol (HTTP), Telnet, Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS), Secure SHell (SSH), Simple Network Management Protocol (SNMP), File Transfer Protocol (FTP), and Secure CoPy (SCP).

The AP9630 Network Management Card

Provides UPS control and self-test scheduling features

Provides data and event logs

Provides support for the APC PowerChute Network Shutdown utility

Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to provide the network (TCP/IP) values of the Management Card

Supports using the APC Remote Monitoring Service (RMS)

Enables you to configure notification through event logging (by the Management Card and Syslog), e-mail, and SNMP traps. You can configure notification for single events or groups of events, based on the severity level or category of events

Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file

Provides a selection of security protocols for authentication and encryption

Communicates with InfraStruXure Central or InfraStruXure Manager

IPv6 Support

Capable of operating on a network using IPv6 protocol

Device Encryption

Securely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3

Standard UPS RFC 1628 MIB Compatible

Make UPS information available to your preferred network, server or enterprise management system by forwarding SNMP traps (events) using RFC 1628 MIB.

Compatible with Smart-Slot enabled UPSs

Compatible with all APC SmartSlot UPSs, including Smart-UPS and Symmetra units

Localization

User interface available in major local languages; English, French, German, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese, Korean, Brazilian Portuguese & Italian.

Command line interface

Offers Telnet or SSH for remote management access